Dell PowerEdge VRTX - Manual (Page 434)

434 Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
mac address-table aging-time
Use the mac address-table aging-time Global configuration command to set
the aging time of the address table. Use the no form of this command to
restore the default.
Syntax
mac address-table aging-time seconds
no mac address-table aging-time
Parameters
seconds—Time is number of seconds. (Range:10-630)
Default Configuration
300
Command Mode
Global Configuration mode
Example
console(config)# mac address-table aging-time 600
port security
Use the port security Interface (Ethernet, Port Channel) Configuration mode
command to enable port security learning mode on an interface. Use the no
form of this command to disable port security learning mode on an interface.
Syntax
port security [forward | discard | discard - shutdown] [trap seconds ]
no port security
Parameters
• forward—Forwards packets with unlearned source addresses, but does not
learn the address.