Dell PowerEdge VRTX - Manual (Page 405)

Template Last Updated - 2/7/2007 Port Channel Commands 405
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
26
Port Channel Commands
channel-group
Use the channel-group Interface (Ethernet) Configuration mode command
to associate a port with a port-channel. Use the no form of this command to
remove a port from a port-channel.
Syntax
channel-group port-channel mode {on | auto}
no channel-group
Parameters
• port-channel—Specifies the port channel number for the current port to
join.
• mode—Specifies the mode of joining the port channel. The possible
values are:
–
on—Forces the port to join a channel without an LACP operation.
– auto—Forces the port to join a channel as a result of an LACP
operation.
Default Configuration
The port is not assigned to a port-channel.
Command Mode
Interface (Ethernet) Configuration mode
Default mode is on.