Dell PowerEdge VRTX - Manual (Page 163)

Management ACL Commands 163
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Management_ACL.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Parameters
• interface-id — Specify an interface ID. The interface ID can be one of the
following types: Ethernet port, Port-channel or VLAN
• service service — Specifies the service type. Possible values are: Telnet,
SSH, HTTP, HTTPS and SNMP.
• ipv4-address — Specifies the source IPv4 address.
• ipv6-address/ipv6-prefix-length — Specifies the source IPv6 address and
source IPv6 address prefix length. The prefix length must be preceded by a
forward slash (/). The parameter is optional.
• mask mask — Specifies the source IPv4 address network mask. This
parameter is relevant only to IPv4 addresses.
• mask prefix-length — Specifies the number of bits that comprise the
source IPv4 address prefix. The prefix length must be preceded by a
forward slash (/). This parameter is relevant only to IPv4 addresses. (Range:
0–32)
Default Configuration
No rules are configured.
Command Mode
Management Access-list Configuration mode
User Guidelines
Rules with Ethernet, VLAN, and port-channel parameters are valid only if an
IP address is defined on the appropriate interface.
Example
The following example permits all ports in the ACL called mlist
console(config)# management access-list mlist
console(config-macl)# switchpermit