Comtech EF Data CDM-700 - Manual (Page 177)

CDM-700 High Speed Satellite Modem Revision 5
Remote Control MN/CDM700.IOM
11–27
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Dual G.703
Port
Configuration BGC=DGC
port1,DGC
port 2 28 Bytes Command or Query.
a=Interface Slot (1or 2)
b=Interface Port (1)
c=Interface Mode (E3/T3/STS1) *ETS
d=Line Coding Enabled(0=None, 1 =Enabled) *TLC
Enabled :
E3 – HDB3
T3,STS1 – B3ZS
e=Framing Type (0=None, 1=G.751, 2=G.752, 3=G.753, 4=STS-1) *RFM
f=Tx Enable (0=Disabled, 1=Enabled) *TIE
g=Tx Data Invert (0=Non-Inverted, 1=Inverted) *TDI
h=Rx Enable (0=Disabled, 1=Enabled) *RIE
i=Rx Data Invert (0=Non-Inverted, 1=Inverted) *RDI
j=Rx Clock Source (0=Reserved, 1=External, 2=Rx, 3=Tx) *RCK
k=Receive Buffer Size (in milliseconds) *RBS
*IAM
m1=Alarm Masking for TxData
m2=Alarm Masking for TxAIS
m3=Alarm Masking for RxAIS
m4=AlarmMasking for Buffer Slip
m5=Alarm Masking for External Clock
a=Interface Slot (1 or 2)
b=Interface Port (2)
same as port 1 BGC=
Response
Only To IFA?
or IFB? with
Dual G.703 N/A
Dual G.703
Global
Configuration DGC= 14 bytes Command or Query.
a=Interface Slot (1 or 2)
b=Interface Port (1 or 2)
c=Interface Mode (E3/T3/STS1) *ETS
d=Line Coding Enabled(0=None, 1 =Enabled) *TLC
Enabled :
E3 – HDB3
T3,STS1 – B3ZS
e=Framing Type (0=None, 1=G.751, 2=G.752, 3=G.753, 4=STS-1) *RFM
f=Tx Enable (0=Disabled, 1=Enabled) *TIE
g=Tx Data Invert (0=Non-Inverted, 1=Inverted) *TDI
h=Rx Enable (0=Disabled, 1=Enabled) *RIE
i=Rx Data Invert (0=Non-Inverted, 1=Inverted) *RDI
j=Rx Clock Source (0=Reserved, 1=External, 2=Rx, 3=Tx) *RCK
k=Receive Buffer Size (in milliseconds) *RBS DGC=
DGC?
DGC#
DGC* DGC?ab DGC=abcdefghijkk.k