Comtech EF Data CDM-700 - Manual (Page 86)

CDM-700 High Speed Satellite Modem Revision 5
Front Panel Operation MN/CDM700.IOM
6–32
Intfc1 OC-3:
Æ Rx
Intfc1 OC-3 Rx: Data
Buf Clk Ena/Dis ( E)
Select Data, Buf, Clk, or Ena/Dis using the ◄ ► arrow keys. Press
ENTER
.
If Intfc1 OC-3 Rx: Æ Data is selected:
Intfc1 Rx Data Rate:
155.520000 Mbps (E)
Intfc1 Rx Data Rate:
Disabled (E)
This is a ‘read only’ status window to display the data rate of the interface. When the Rx side of
this interface is enabled or disabled via Intfc1 OC-3 Rx: Æ Ena/Dis (see section on pg. 6-3x),
that status is reflected in this display:
• When Rx is enabled, the data rate of the interface is displayed, as shown in the top
example.
• When Rx is disabled, that status is reflected in this display, as shown in the bottom
example.
Press
ENTER
or
CLEAR
to return to the previous menu.
If Intfc1 OC-3 Rx: Æ Buf is selected:
Intfc1 Rx Buffer:
Size ReCenter (E)
Select Size or ReCenter using the ◄ ► arrow keys. Press
ENTER
.
If Intfc1 Rx Buffer: Æ Size is selected:
Intfc1 Rx Buffer Size:
10.0 mSec (1555.200 Bits) (E)
Edit the Rx Buffer Size by selecting the digit to be edited, using the
◄ ► arrow keys. The value
of the digit is then changed using the ▲ ▼ arrow keys. The range of values is from 00.0 to 26.0
mSec. Press
ENTER
.