HEIDENHAIN TNC 640 (34059x-05) ISO programming - Manual (Page 113)

File Management: Fundamentals 3.3
3
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
113
Displaying externally generated files on the TNC
The TNC features several additional tools which you can use to
display the files shown in the table below. Some of the files can
also be edited.
File types Type
PDF files
Excel tables
Internet files
pdf
xls
csv
html
Text files txt
ini
Graphics files bmp
gif
jpg
png
For further information about displaying and editing the listed file
types: see page 126
Data Backup
We recommend saving newly written programs and files on a PC at
regular intervals.
The TNCremo data transmission freeware from HEIDENHAIN is a
simple and convenient method for backing up data stored on the
TNC.
You additionally need a data medium on which all machine-
specific data, such as the PLC program, machine parameters,
etc., are stored. Ask your machine manufacturer for assistance, if
necessary.
Saving the contents of the internal memory can take
up to several hours. In this case, it is a good idea to
save the data outside of work hours, e.g. during the
night.
Take the time occasionally to delete any unneeded
files so that the TNC always has enough memory
space for system files (such as the tool table).
Depending on operating conditions (e.g. vibration
load), hard disks generally have a higher failure rate
after three to five years of service. HEIDENHAIN
therefore recommends having the hard disk
inspected after three to five years.