HEIDENHAIN TNC 640 (34059x-05) ISO programming User Manual
Page 454
Programming: Turning Operations
14.2 Basic functions (Option 50)
14
454
TNC 640 | User's ManualDIN/ISO Programming | 1/2015
In Turning mode, diameter values are displayed on
the X axis position display. The TNC then shows a
diameter symbol on the position display.
In Turning mode, the spindle potentiometer is
effective on the turning spindle (rotary table).
Switching mode is not possible if "Tilting the working
plane" or TCPM is active.
In Turning mode, no coordinate conversions are
permitted except for the datum shift cycle.
You can also use the smartSelect function for
defining the turning functions, see "Overview of
Entering the operation mode:
Show the soft-key row with special functions
Select the menu for
TURNING PROGRAM
FUNCTIONS
Select
BASIC FUNCTIONS
Select
FUNCTION MODE
Select the function for Turning or Milling mode
Select the kinematic model that is to be activated
with switchover (machine-dependent function).
If you do not want to define a kinematic model,
confirm with the NO ENT key
NC syntax
11 FUNCTION MODE TURN "AC_TABLE" ; ACTIVATE TURNING MODE
12 FUNCTION MODE MILL "B_HEAD" ; ACTIVATE MILLING MODE