HP StorageWorks 2.140 Director Switch - Manual (Page 160)

Zoning 158
The Replace Zone Member dialog box is displayed ( Figure 98 ).
Figure 98 Replace Zone Member dialog box
3. Enter the domain and port IDs or the WWN of the replacement member.
4. Click OK.
Copying a zone set
To copy a zone set:
1. Display the zone library. See ” Displaying the zone library ” on page 149.
The Zoning dialog box is displayed ( Figure 91 ).
2. Right-click the zone set that you want to copy.
• Select Duplicate to copy the zone set.
• Select Deep Duplicate to copy the zone set and its zones.
The copied zone set is displayed.
3. Optionally, enter a new name for the zone set. See ” Replacing zone members ” on page 157.
4. Click OK.
Deleting a zone
To delete a zone:
1. Display the zone library. See ” Displaying the zone library ” on page 149.
The Zoning dialog box is displayed ( Figure 91 on page 149).
2. Right-click the zone you want to delete and click Delete.
NOTE: The zone is deleted without confirmation. If you delete a zone accidentally, click Cancel
instead of OK to restore it.
3. Click OK.
Deleting a zone set
To delete a zone set:
1. Display the zone library. See ” Displaying the zone library ” on page 149.
The Zoning dialog box is displayed ( Figure 91 on page 149).
2. Right-click the zone set you want to delete and click Delete.