Chapter six: operating your rpc – Lyntec RPC User Manual
Page 37
Advertising
139-0498-01.37
37
Chapter Six--Operation
Chapter Six: Operating your RPC
Figure 6-1
Using the built-in web page
To operate the RPC using the built in web page, select the
control tab from the top of the page. Once on the CONTROL
page, simply click each breaker for individual control. Or,
click a zone for zone control. “All zones ON” and “Hurry-Off ”
commands can also be executed from this page.
Using a secondary controller
For DMX, follow the manufacturer’s instructions using the DMX
addresses entered in the NETWORK page ( see pang 26).
RS-232 and TCP/IP schemes are in Appendix B (page 38).
Advertising