Lyntec RPC User Manual
Page 47
139-0498-01.47
47
Appendix B
Reply to activate/deactivate zone command: status of
updated zones
0xB0, 0xC9, zone_address_i, zone_status_i, zone_address_j, zone_
status_j, …, zone_address_n, zone_status_n, 0xF0
zone_address_i, zone_status_i, zone_address_j, zone_status_j,
…, zone_address_n, zone_status_n – addresses and status of
zones updated by the command reply is generated for
Reply to request zone status command: status of all 12
zones
0x40, 0xB9, byte_1, byte_2, byte_3, 0x80
byte_i: bits 7-6: status of zone # 4i, bits 5-4: status of zone 4i-1,
bits 3-2: status of zone 4i-2, bits 1-0: status of zone 4i-3, i=1-3
Zone status description (2 bits)
Value
1
2
3
Status
Off On
Sequencing
Event ON
0xB0, 0xBA, event_number_1, …, event_number_m, 0xF0
event_number_1, … event _number_m – numbers of events to
be turned on
m<=2
Event OFF
0xB0, 0xBB, event_number_1, …, event_number_n, 0xF0
event_number_1, … event_number_n – numbers of events to
be turned off
n<=2
Event ON/OFF
0xB0, 0xBA, event_number_1, … event_number_m, 0xBB, event_
number_1, …, event_number_n, 0xF0
event_number_1, … event_number_m – numbers of events to
be activated
event_number_1, … event_number_n – numbers of events to
be deactivated
m+n<=2
Event Related Commands