1 specifying the starting point, Specifying the starting point – Navigon Fujitsu Siemens Pocket LOOX N100 User Manual
Page 49
User Manual MobileNavigator 6
Routes with stages
- 47 -
6.1.1
Specifying the starting point
The starting point of a route is the point at which you wish to
start off the journey. This doesn't always have to be the current
location. If you are planning a route for an excursion on your
holiday whilst you are at home, you can, for example, use your
hotel as the starting point.
The starting point is only important if you wish to see a planned
route on the map, but at the moment have no GPS reception or
you are not located at the planned starting point. The starting
point that you specify therefore has the consecutive number “0”.
As soon as you start navigating, your current location will be
used for the route calculation.
The first stage is therefore the journey to the route point with the
consecutive number “1”.
1. Tap on the 0 button or on the Specify starting point field.
The P
OINT OF DEPARTURE
menu opens.
If you wish to specify a specific address as a starting point:
2. Tap on the Enter an address menu item.
3. Enter the address of the starting point. (refer to chapter
"Destination address", page 25)
4. Tap on the Set starting point button.
If you wish to specify a point of interest as a starting point:
2. Tap on the Search for POI menu item.
3. Enter the address of the starting point. (Refer to chapter
"Points of interest", page 27)
4. Tap on the Set starting point button.
If you wish to specify a save destination as a starting point:
2. Tap on the My destinations menu item.
3. Select a destination. (refer to chapter "Selecting a saved
destination", page 32)
4. Tap on the Set starting point button.
If you wish to specify your home address as a starting point:
2. Tap on the My Address menu item.
Refer to chapter "Defining a destination as your home
address" on page 42 for information on saving your home
address.