Navigon Fujitsu Siemens Pocket LOOX N100 - Manual (Page 82)

User Manual MobileNavigator 6
- 80 - Opening the 1308HSettings window
9.1 Opening the Settings window
The S
ETTINGS
window is the starting point for all adaptations that
you can use to set up MobileNavigator 6 in accordance with
your personal requirements.
The M
AIN WINDOW
is open (refer to chapter "Opening the main
window", page 25).
1. Tap on the Options button.
The options list opens.
2. Tap on the Settings option.
The S
ETTINGS
window opens.
The S
ETTINGS
window has several buttons. Tap on a button in
order to open the respective settings window.
There are four settings windows: C
URRENT MAP , POI, B ASIC
SETTINGS And R OUTE PROFILE .
The settings of the individual windows are distributed over
several screens. You can leaf through them by using the (To
the left) and (To the right) buttons.
Some settings can only accept two or three different values. You
can see which settings these are from the (Toggle) button.
All possible values are visible. The currently valid value is
highlighted in black.
1. Tap on the (Toggle) button in order to toggle between
the possible values.
Some settings can accept lots of different values. You can see
which settings these are from the (List) button. The
currently valid value is visible.
1. Tap on the (List) button.
A list of possible values opens. The currently valid value is
selected.
If the list is long, you can move within it using the (Up)
and (Up) buttons.
2. Tap on the desired value. It is now selected.
3. Tap on the OK button.
The list closes. The new value is displayed.