2 map in the preview mode, Map in the preview mode – Navigon Fujitsu Siemens Pocket LOOX N100 User Manual
Page 59
User Manual MobileNavigator 6
Working with the Map
- 57 -
7.2
Map in the Preview mode
You have specified a destination and tapped on the Start
navigation button.
- OR –
You have planned or loaded a route and tapped on the Show
route button.
The map opens in Preview mode. You see the entire route.
Description
1
The destination is marked by a small flag.
If you view a planned or loaded route, the starting
point and each route point are marked with a little
flag.
2
The route is orange highlighted.
3
A triangle in orange shows the current position.
If you view a planned or loaded route and the
specified starting point is not your current position,
then the current position may not be shown on the
preview.
4
You can see the entire route in a small information
box. This also includes the probable duration of
journey and probable arrival time.
If you are viewing a route with several stages, you
can also see this information for each stage.
Note: You can configure the content of the information box.
Refer to chapter "Configuring MobileNavigator 6" on page 79.
Tap on the Route profile button in order to view and possibly load
the settings that form the basis of the route calculation.