Navigon Fujitsu Siemens Pocket LOOX N100 - Manual (Page 74)

User Manual MobileNavigator 6
- 72 - POI on your route
8.6 POI on your route
Whilst navigating you can view points of interest (that are located
on your route) from three specific categories at any time. This
way you can find out quickly, e.g. where the next la—by is. You
can then, for example, insert this lay-by as an interim destination
in your route.
Note: Points of interest from the same categories that are also
available in the Direct Access will be shown. You can configure
these categories.
Refer to chapter "Categories for quick link and for POI on your
route" on page 82 for more information.
The map is opened in Navigation mode.
1. Tap on any point on the map.
2. Tap on the POI on your route button.
The POI ON YOUR ROUTE window opens. It shows from each of
the three categories the two next points of interest that are
located on or in the vicinity of your route.
The points of interest are arranged according to distance.
Specifying one of the points of interest as an interim destination
If you wish to drive to one of the displayed points of interest,
then tap on the (Interim destination) button to the right
alongside its entry in the list.
The route is recalculated. The specified point of interest is taken
as the next route point.
8.7 TMC (Traffic information)
If your device has an integrated TMC-receiver, or if you have
connected an external TMC receiver, the navigation system will
have the latest traffic information available, and can, where
necessary, dynamically change your route in order to avoid a
traffic jam, for example. The current valid traffic reports can be
displayed.
1. Tap the Options button in the Main window.
The options list opens.
2. Tap the Traffic button.