2 managing routes, 1 saving routes, 2 loading routes – Navigon Fujitsu Siemens Pocket LOOX N100 User Manual
Page 52: Managing routes, Saving routes, Loading routes
User Manual MobileNavigator 6
- 50 -
Managing routes
6.2
Managing routes
You can save each planned route under a specific name.
Note: Only the starting point and the route points are saved, but
not the calculated route. If you load a saved route, you must
recalculate prior to navigating.
You can load, rename or delete saved routes.
6.2.1
Saving routes
The R
OUTE PLANNING
is open. You have specified the starting
point and at least one route point. (refer to chapter "Route
planning", page 46)
1. Tap on the Options button.
The options list opens.
2. Tap on the Save route option.
The S
AVE ROUTE AS
… dialogue window opens. The cursor
flashes in the Name field.
3. Enter a name for the destination.
4. Tap on the Save button.
The destination is now recorded in the S
AVED ROUTES
list. The
dialogue window closes.
6.2.2
Loading routes
The R
OUTE PLANNING
is open. (refer to chapter "Route planning",
page 46)
1. Tap on the Options button.
The options list opens.
2. Tap on the Saved routes option.
The S
AVED ROUTES
list opens.
If the list is long, you can move within it using the
(Up)
and
(Up) buttons.
3. Tap on the route that you wish to load.
4. Tap on the Load route button.
The R
OUTE PLANNING
window opens. The starting point and
the route points of the loaded route are entered.