3 editing route points, Editing route points – Navigon Fujitsu Siemens Pocket LOOX N100 User Manual
Page 51
User Manual MobileNavigator 6
Routes with stages
- 49 -
If you wish to specify your home address as a route point:
2. Tap on the My Address menu item.
Refer to chapter "Defining a destination as your home
address" on page 42 for information on saving your home
address.
The specified route point is now shown as the last route point.
On the button before it you can see its consecutive number.
Repeat these steps for each additional destination that you wish
to add to the route.
6.1.3
Editing route points
Route points can be deleted from a route. You can change the
sequence of the route points too.
The
R
OUTE PLANNING
is open. At least one route point has already
been specified. (refer to chapter "Route planning", page 46)
Note: You can neither move nor delete the starting point
(consecutive number “0”).
1. Tap on the route point you wish to edit.
If the list of route points is long, you can move within it using
the
(Up) and
(Up) buttons.
The route point pop-up menu opens. To the left of this you
can see the consecutive number of the chosen route point.
The pop-up menu includes the following buttons:
Ù
Route point up: moves the selected route point
further forwards. (Example: Route point 2 becomes route
point 1)
Ù
Route point down: moves the selected route
point further backwards. (Example: Route point 2 becomes
route point 3)
Ù
Delete: Deletes the selected route point. A
dialogue asks you to confirm the deletion.
2. Tap on one of the buttons in order to execute the respective
function.
- OR –
Tap on the consecutive number alongside the buttons. The
pop-up menu then closes without performing a function.