4 skipping a stage, 5 blocking a route section, Skipping a stage – Navigon Fujitsu Siemens Pocket LOOX N100 User Manual
Page 73: Blocking a route section
User Manual MobileNavigator 6
Useful Functions
- 71 -
8.4
Skipping a stage
This function is only available if you are navigating and have at
least 2 route points ahead of you.
The map is opened in Navigation mode.
Use this function is you wish to leave out the next route point.
Example: You have planned and already started a route from
your office via “company a” to “company b”. Before you reach
company A you are told that you do not need to visit company A.
Tap on the Skip route point button in order to approach the next
but one route point (in this example: “company B”).
The route is then recalculated so that the next but one route
point is approached as the next destination.
8.5
Blocking a route section
Whilst navigating you can block one of your route sections at any
time, i.e. recalculate the route to avoid this section, perhaps
because you've heard there is a jam on this section.
Note: The block is valid for the current navigation and will no
longer be taken into consideration for a new navigation.
The map is opened in Navigation mode.
1. Tap on any point on the map.
2. Tap on the Block button.
The B
LOCK
menu opens.
3. Enter how many kilometres you wish to block – starting from
your current location.
The route is recalculated. The blocked section of route will be
detoured. It is marked on the map in red.
Cancelling the block
1. Tap on any point on the map.
2. Tap on the Unblock button.
The block is cancelled. The route is recalculated. The section of
route the block for which has been cancelled can then be included
in the calculation again.