2 specifying route points, Specifying route points – Navigon Fujitsu Siemens Pocket LOOX N100 User Manual
Page 50
User Manual MobileNavigator 6
- 48 -
Route planning
If you wish to specify your current location as a starting point:
2. Tap on the Current position menu item.
The chosen starting point is now shown alongside the 0 (Point
OF
DEPARTURE
) button.
Editing the starting point
1. Tap on the 0 button or on the Specify starting point field.
The P
OINT OF DEPARTURE
menu opens. You can now specify a
different starting point. Proceed as described above.
6.1.2
Specifying route points
The route points of a route are the destinations to which you
would like to navigate.
In front of each route point you can see its consecutive number
on a button.
1. Tap on the + button or on the Specify route point field.
The R
OUTE POINT
menu opens.
If you wish to specify a specific address as a route point:
2. Tap on the Enter an address menu item.
3. Enter the address of the route point. (refer to chapter
"Destination address", page 25)
4. Tap on the Add button.
If you wish to specify a point of interest as a route point:
2. Tap on the Search for POI menu item.
3. Enter the address of the starting point. (Refer to chapter
"Points of interest", page 27)
4. Tap on the Add button.
If you wish to specify a save destination as a route point:
2. Tap on the My destinations menu item.
3. Select a destination. (refer to chapter "Selecting a saved
destination", page 32)
4. Tap on the Add button.