Navigon Fujitsu Siemens Pocket LOOX N100 - Manual (Page 78)

User Manual MobileNavigator 6
- 76 - TMC (Traffic information)
8.7.3 Managing TMC information
You can configure the TMC settings to determine how TMC
information concerning your route should be managed.
For information on how to determine the settings, please refer to
"TMC Settings", page 74.
Note: This setting only takes effect if the route profile has been
set to consider traffic jams. For detailed information, please refer
to chapter "Route profile", page 87.
Recalculate Route: Automatically
If a reported obstruction concerns your route, the system will
calculate an alternative route automatically. The following
message appears while the system is calculating the deviation.
"The route is being recalculated due to traffic information
update."
You can reset the alternative to the original route at any time. To
do this, open the T RAFFIC INFORMATION window and tap the
(Ignore) symbol next to the relevant message.
Recalculate Route: On request
If a reported obstruction concerns your route, the M
ESSAGE
window opens. It displays the full message.
Ù Tap the Avoid / Ignore button in order to to take traffic
obstructions on your route into consideration.
The navigation system calculates an alternative route in order
to avoid the obstruction.
Ù Tap the same button again to ignore the obstruction reported
on your route.
8.7.4 Tuning
1. Tap the T RAFFIC INFORMATION button in the Options window.
The options list opens.
2. Tap the TMC Settings button.
The TMC S
ETTINGS
window opens. The name, frequency, and
the reception quality of the current station are displayed at
the top of the screen.
3. In the Tuning field, select one of the following settings
Automatic, Hold Station or Hold Frequency.