B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 104)

104 Airborne Enterprise CLI Reference Manual
cfg-encrypt
Command cfg-encrypt
Arguments enable | disable | protected | protected | permanent
Security
Level
Read: 3 (config)
Write: 4 (OEM)
Device Type All
Default disable
Description Enables or disables encrypting wireless keys in the module's configuration files.
enable
Wireless keys are stored in a separate, encrypted configuration file
(user_enc_config.uue).
The following parameters are affected:
pw
pw-cfg
pw-leap
pw-manuf
pw-oem
pw-root
pw-wpa-psk
wl-key-1
wl-key-2
wl-key-3
wl-key-4
ftp-password
ssh-default-password
eap-password
is-psk-calc
pre-calc-psk
priv-key-password
priv-key2-password
The files will be split after a commit and restart or power cycle has been
completed.
disable
Wireless keys are visible as plaintext in the configuration file
(user_config.txt, oem_config.txt).
If cfg-encrypt disable is later reconfigured to cfg-encrypt
enable
, the two configuration files will be remerged into a single plaintext
user_config.txt file upon the next commit.
Level 4 (OEM) users can issue this command.
locked
Wireless keys are stored in a separate, encrypted configuration file
(user_enc_config.uue). The list of protected parameters is shown in
the enable option.
Only L5 (Manufacturer) users can clear this setting.
To clear the setting, the clear cfg-encrypt command must be used.
When the command is used the cfg-encrypt is returned to enable.