B&B Electronics WLNN-AN(ER,SE,SP.EK)-DP551 - Manual - Manual (Page 192)

192 Airborne Enterprise CLI Reference Manual
return
Command return
Arguments none
Security
Level
2 (data)
Device Type All
Default <none>
Description Finish running a script immediately and return to the calling script or CLI. If already at the CLI level, this
command does nothing.
rf-link-led
Command rf-link-led
Arguments enable | disable
Security
Level
3 (config)
Device Type All
Default enable
Description Controls the function of the GPIO pin (F2) used for the LED_RF_LINK, pin 27.
enable
Defines the output of GPIO pin F3 as the RF_LINK. The RF_LINK LED turns on when the
Airborne adapter has successfully authenticated with a WLAN.
disable Defines the GPIO pin F2 for use as a general purpose digital I/O pin.
The LED_CON must be disabled for io-dir-f, io-pullup-f and io-write to affect GPIO F2.