HEIDENHAIN TNC 306 Technical Manual - Manual (Page 252)

5-4
TNC 416/TNC 406/TNC 306 Input/output of machine parameters 3/2000
2.2 Activating the machine parameter settings
When the values for the machine have been entered, exit the machine parameter list by pressing
END
. Missing or incorrect entries result in error messages from the control that prompt you to
make corrections.
If the control does not recognize any errors, it automatically exits the machine parameter editor and
is ready for operation.
2.3 Changing input values
Call the machine parameter editor through the MOD function "code number."
Enter code number 95148 or 105296 to access the complete list of machine parameters.
Code number 123 opens a partial list of machine parameters. These are the machine parameters
that may be changed by the user (see TNC 306 User's Manual). Those machine parameters which
can be accessed with code number 123 are identified in the machine parameter list with "123" in the
column "Change via."
Exit the machine parameter editor by pressing END .
Code number 53 12 10 delete all machine parameter settings.