Luminex 100 IS User Manual, Version 2.3 - Manual (Page 114)

Luminex 100 IS User Manual Version 2.3
x
MAP Technology
5 - 72 PN 89-00002-00-071 Rev. C
tinue. Once you enter the numbers, the Update Lot Informa-
tion dialog box opens. See Figure 5-42 and Figure 5-43.
b.) If the template has associated lot information, the Update
Lot Information dialog box opens. To create a new lot when
there is an existing lot, click New Lot on the Standard or
Control section of the dialog box. A New Standard Lot or
New Control Lot dialog box opens. Enter the standard or
control lot number. See Figure 5-42 and Figure 5-43.
3. Click OK.
Figure 5-42. Add Lot Standard and Control Dialog Boxes
Figure 5-43. Update Lot Information Dialog Box
Note: Depending on the
types of products associ-
ated with the template that
you select, the screen may
vary from the example in
Figure 5-43. That is, if you
are creating only standard
lots, then only the upper