Luminex 100 IS User Manual, Version 2.3 - Manual (Page 211)

PN 89-00002-00-071 Rev. C C - 1
Output.CSV
Overview
This chapter describes the file specification for the Luminex 100 IS
2.3 OUTPUT.CSV file. Although this document may refer to older
versions of Luminex software for historical purposes, it is intended
only to describe the OUTPUT.CSV file for the Luminex 100 IS 2.3
system. Although this chapter was prepared to ensure accuracy,
Luminex assumes no liability for errors or omissions or for damages
resulting from the application or use of this information.
The OUTPUT.CSV file was created to provide a simple data report.
The file displays general batch information and statistical results.
Note that the term Batch is synonymous with Session in other
versions of Luminex Software.
Overall Design
The OUTPUT.CSV file contains two blocks of information. The first
is the header, which contains general batch information. The second
block of information is the results section, which contains several
subsections displaying statistical analyses in a Sample versus Test
format, as illustrated in the following example:
Batch Header
Results
Stat1
Stat1 Header: Sample Location, Sample Name, Test1, Test2, ...,
TestN, Total Count, Notes
Sample1
Sample2
....
SampleM
Stat2
StatN Header: Sample Location, Sample Name, Test1, Test2, ...,
TestN, Total Count, Notes
Sample1
C