Luminex 100 IS User Manual, Version 2.3 - Manual (Page 128)

Luminex 100 IS User Manual Version 2.3
x
MAP Technology
5 - 86 PN 89-00002-00-071 Rev. C
Figure 5-56. Choose Lot Dialog Box—Standard Only
3. To create a new lot from this dialog box as an alternate method,
click New Lot and follow the steps in the Create New Lot
procedure on “Create a New Lot” on page 5-71.
‹
To create a new lot for use within a batch:
1. Click New Lot.
2. In the Update Lot Info dialog box, select Standard lot or
Control lot, then click Save to display the Choose Lot dialog
box. An asterisk identifies the selected lot. See Figure 5-55.
Running Reports and
Analyses
You can output data by printing reports and exporting batch data.
Report Types The Luminex IS 2.3 software can format your batch or multibatch
results in a variety of export formats and provide different types of
information in different types of reports.
Analyte Report - prints some or all of the samples grouped by the
test in a batch.
Clinical Patient Report - provides a breakdown of samples
according to the test analysis with that sample.
Patient Summary Report - prints all of the test results for a patient;
may include all tests or selected tests on the report.
Quality Control Report - used to track the trends of assay standards
and assay controls over a period of time.