Luminex 100 IS User Manual, Version 2.3 - Manual (Page 119)

x
MAP Technology Using Luminex 100 IS 2.3 Software
PN 89-00002-00-071 Rev. C 5 - 77
curve. Replicate samples are averaged to determine the reported
quantitative result denoted as “AVG”.
The system can analyze only batches that it acquires using qualitative
or quantitative templates. It does not analyze acquisitions using Data
Collection Only or Maintenance templates.
For an overview of the Analysis window, see page 5-22.
Customize Data
Analysis Settings
You can customize how the sample data results are displayed in the
analysis graph on the Standards tab. There are two options that allow
you to customize the display. Use the Customization dialog box and
the Graph Menu (right-click menu); some items are available on
both. You can define the general features of the graph, axis settings
and increments, fonts, colors, and styles presented in the graph
representing the sample data results. You also can export the analysis
to a graphic, file, clipboard, and so on.
‹
To modify the general features of the Standards tab graph:
1. Click Data Analysis.
2. Double-click the desired batch. The Analysis window opens
displaying the Standards tab.
3. Double-click anywhere within the graph to display the
Customization dialog box. See Figure 5-46. Notice across the
dialog box are five tabs: General, Axis, Font, Color, and Style.
Also notice that there are six buttons along the bottom of the
dialog box. They are the OK, Cancel, Apply, Original, Export,
and Maximize buttons.
Figure 5-46. Customization Dialog Box—General Tab
Note: Luminex does not rec-
ommend performing Data
Analysis while the Luminex
System is performing data
acquisition on another batch.