IDEC High Performance Series - Manual (Page 4)

iii
External Device Setup Manual
• Do not switch off the power or pull out the Memory Card while it is being accessed, as this may result in destruction of
the stored data. If the data on the Memory Card is corrupted, format the Memory Card.
• Be sure to confirm that the Memory Card Access lamp is not lit prior to turning the power off to the HG2G-5F,
HG3G/4G, HG2F/3F/4F or pulling out the Memory card. Refer to the WindO/I-NV2 User’s Manual for details.
• Do not switch off the power or pull out the USB flash drive while it is being accessed, as this may result in destruction
of the stored data. If the data on the USB flash drive is corrupted, format the USB flash drive.