IDEC High Performance Series - Manual (Page 42)

Chapter 2
24
External Device Setup Manual
1 IDEC
Selecting OpenNet (FC3A) or MicroSmart (FC4A/FC5A) as the Host I/F Driver allows the user to use the 1: N Communication and
Pass-through function. Selecting Web Server Unit (FC3A/FC4A/FC5A) as the Host I/F Driver allows the user to use 1: N Communi-
cation.
• Pass-through function (Refer to “Pass-Through Function” in the WindO/I-NV2 User’s Manual)
• 1: N Communication function (Refer to Chapter 6 "1: N Communication (Multi-drop)" on page 627)
1.1 Connection Table
1.1.1 Compatible PLCs
Series Name System
(CPU unit) Link unit WindO/I-NV2 Settings
Interface Flow
Control Host I/F Driver
OpenNet Controller FC3A-CP2 Not required
(connects to CPU unit) RS232C
Connection Diagram 1
(refer to P37) Hardware OpenNet(FC3A),
MicroSmart
(FC4A/FC5A)
RS422/485 2-wire
Connection Diagram 2
(refer to P40)
Web Server Unit
(FC4A-SX5ES1E) Ethernet - Web Server Unit
(FC3A/FC4A/FC5A)
MICROSmart
*1 FC4A-C10R2 Not required
(connects to CPU unit) RS232C
Connection Diagram 3
(refer to P43) Hardware OpenNet(FC3A),
MicroSmart
(FC4A/FC5A)
RS232C
Connection Diagram 1
(refer to P37) None
Web Server Unit
(FC4A-SX5ES1E) Ethernet - Web Server Unit
(FC3A/FC4A/FC5A)