Visara 1330-X02 - Manual (Page 112)

701333-004 6-3
Operating the 1330
Adjusting the Top of Form Position
Once you have printed the setup line, you can visually verify the top of form position, as
well as the left and right margins of the print line. If you want to fine adjust the top of
form position, follow these steps:
1. Press Stop to place the 1330 in Stop mode.
2. Press the Form Feed key to advance the forms to the next top of form position.
3. To fine adjust the top of form position, press the Up Arrow key or Down Arrow key.
Each time you press one of these keys, the form is moved 0.007 inch (0.18 mm).
4. Press the Top of Form key to inform the 1330 of the new location.
5. To check the top of form, press the Form Feed key.
6. To return the 1330 to Start mode, press the Start key.
Storing Printer Configuration Values
You can configure the printer differently for various types of print jobs, save these
configurations in separate custom sets, and recall a specific custom set for particular
print jobs. However, some of the configuration options that do not generally need to be
changed for different types of print jobs are not included in the custom set. In 3270
mode, these options include the following:
• Horizontal Offset
• Horizontal Registration
• Print Head Pulse Width
• Print Head Column Spacing
• Print Head Type
• Character Count
• Track Select Adjust
• Vital Product Data User Information
• Vital Product Data Serial Number
• POR Custom Set
In ASCII mode, the following options are not included in custom sets:
• ASCII Interface
• ASCII Baud Rate
• ASCII Data Bits