Visara 1330-X02 - Manual (Page 14)

1-6 701333-004
Introduction
Forms Handler Module
The Forms Handler module is operator installable in the front of the printer to vertically
position forms. The module’s forms tractors are adjustable for two options:
• Document on Demand (DOD) option – used for continuous forms
• Document Insertion Device (DID) option – used for cut sheet/single sheet forms
Printer Pedestal Stand
The pedestal stand is designed so that the printer can be securely seated. The forms
supply is placed in the stand’s paper compartment and feeds into the front of the 1330
from below.
Forms Stand
The forms stand is placed behind the printer to hold both new and printed fanfold forms.
Related Manuals
Appendix D of this manual contains programming information for special 1330 escape
codes.
For more information on printer control codes in Appendix B, see the IBM 4224 Printer
Product and Programming Description Manual, GC31-2551; IBM 4230 Printer Product
and Programming Description Manual, GC40-1701-00; IBM 3270 Information and
Display System, GA23-0061; IBM 3268 Printer Models 2 and 2C Description, GA27-
3268; IBM Proprinter III and IIIXL Guide to Operations, SA34-2065-1; IBM Proprinter
Family Technical Reference, SC31-2589-3; and the ANSI Standard X3.64-1979.