Visara 1330-X02 - Manual (Page 13)

701333-004 1-5
Introduction
• 3440 bytes
• 3564 bytes
The size can be selected by the operator during configuration.
Self-Diagnostic Testing
The 1330 has a self-diagnostic ability to ensure that the printer is in good working
condition. If an error condition is encountered, the 1330 informs the operator by displaying
an error message on the control panel. Should this occur, refer to the error message chart
in Appendix A of this manual.
Audible Alarm
The 1330 features an audible alarm that sounds when the printer needs operator assistance
(such as when the paper is skewed or out). In this situation it will continue to beep
intermittently, unless it is disabled.
Programmed Symbols
In 3270 mode, six symbol sets are operator configurable either as six single plane sets or
as three single plane sets and one triple plane set.
IPDS
Intelligent Printer Data Stream (IPDS) is a structured field datastream for managing
printing processes and data objects. IPDS uses All Points Addressability (APA) to enable
the user to position text, graphics, image data, overlays, and bar codes at any defined
point on a printed page. Extended memory is recommended for graphics applications.
Optional Features
The following optional accessories are available for the 1330. These items can be ordered
through your sales representative.
Memory
This feature adds 512K bytes of RAM memory to the standard 128K bytes of memory
for a total of 640K bytes. The extra memory is recommended for the following
applications: IPDS, programmed symbols, ASCII graphics, ASCII downloaded fonts,
and dual host (auto-switching) operations.
Continuous Forms Module
The continuous forms module provides the operator with a reliable way of feeding the
1330 with continuous forms.