Visara 1330-X02 - Manual (Page 40)

701333-004 3-1
Chapter 3. Operator Control Panel
The 1330 Operator Control Panel, located on the front of the printer, consists of the
status display window and the keypad. The status display monitors printer operations,
and the keypad is used to start and control operator functions. See Figure 3-1.
Start
Load/
Eject
Top of
Form Option
Contrast
Setup
Stop
Form Feed Line Space
Save
Cancel
Print
Figure 3-1. 1330 Operator Control Panel
The Status Display
The 80-character status display window, located on the left side of the operator control
panel, indicates the operating mode, the printing formats, and other conditions on the
1330. Several of these messages are explained below. (See Figure 3-2 for status display
layout.) Messages that appear during print format operations and configuration are
discussed in Chapters 4 and 5.
OPERATING MODE
CU S/C/A FORM DEVICE
EMULATION
MODE DATASTREAM
MODE
RESERVED LINE
STATUS MESSAGE
LINE
Figure 3-2. Status Display