Visara 1330-X02 - Manual (Page 114)

701333-004 6-5
Operating the 1330
To reprint the print buffer, follow these steps:
1. Press Stop to place the 1330 in Stop mode.
2. Correct any problems that need attention.
3. Press Form Feed to advance the forms to the first line of the next page.
4. Go to Buffer Reprint (Option 710) and press Save.
5. To return to Start mode and resume printing, exit Option mode and press the Start
key.
Note: In SCS operations, the buffer cannot be reprinted. For this reason, when you use
Buffer Reprint in SCS operations, the 1330 sends an Intervention Required (IR)
message requesting that the last set of data be retransmitted.
Requesting a Host Application Program in SCS Mode
SCS users can use the Program Attention (PA1 and PA2) key functions to request an
application program from the host. Follow these steps to use the PA1 or PA2 key function:
1. Press Stop to put the 1330 in Stop mode.
2. Enter Menu mode.
3. Select Option 708 for PA1.
or
Select Option 709 for PA2.
4. Press the Save key.
5. Return to Start mode.
Halting a Print Operation in SCS Mode
To cancel a print operation in SCS mode, follow these steps:
1. Press Stop to place the 1330 in Stop mode.
2. Press the Cancel Print key to halt printing and clear the print buffer.
To suspend printing, follow these steps:
1. Press Stop. This will put the printer in Stop mode and suspend printing temporarily.
2. You can return the 1330 to Start mode by pressing the Form Feed key (to advance to
top of form, if necessary), followed by Start.