Get server parameter values – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 163
VIVOTEK
User's Manual - 163
© 2022 VIVOTEK INC. All Right Reserved
32
5.
Get Server Parameter Values
Note:
The access right depends on the URL directory.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/
anonymous
/getparam.cgi?[
<parameter>
]
[&<parameter>…]
http://<
servername
>/cgi-bin/
viewer
/getparam.cgi?[
<parameter>
]
[&<parameter>…]
http://<
servername
>/cgi-bin/
operator
/getparam.cgi?[
<parameter>
]
[&<parameter>…]
http://<
servername
>/cgi-bin/
admin
/getparam.cgi?[
<parameter>
]
[&<parameter>…]
Where the
<parameter>
should be
<group>
[_
<name>
] or
<group>
[.
<name>
]. If you do not specify
any parameters, all the parameters on the server will be returned. If you specify only
<group>
, the
parameters oftherelated group will be returned.
When querying parameter values, the current parameter values are returned.
A successful control request returns parameter pairs as follows:
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where<parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]
<length> is the actual length of content.
Example
: Request IP address and its response
Request:
© 2022 VIVOTEK INC. All Right Reserved
33
http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n