Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 377)

VIVOTEK
User's Manual - 377
© 2022 VIVOTEK INC. All Right Reserved
246
P
LEASE REFER TO
PTZ C
ONTROL
API
7.41 Camera PTZ Control (SD Series)
Group: camctrl_c<0~(n-1)> for n channel products (the bit7 of capability_ptzenabled is 0 and the
bit4 of capability_ptzenabled is 1)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME VALUE SECURITY
(get/set) DESCRIPTION
ccdtype string[16] 6/7 (Internal used, read only)
motortype string[16] 6/7 (Internal used, read only)
cameraid 1 ~ 255 1/4 Camera ID controlling external
PTZ camera.
Note:
Please set your speed dome to
the appropriate baud rate, and
Camera ID, e.g. 2400bps, camera
ID 1,2,3,,,,etc.
All Camera IDs on the same
controlling system (NVR or rs485
keyboard) have to be distinct.
Therefore, once you send a
controlling signal, each camera
will only accept the inputs with
the corresponding ID.
panspeed -5 ~ 5 1/4 Pan speed
tiltspeed -5 ~ 5 1/4 Tilt speed
zoomspeed -5 ~ 5 1/4 Zoom speed
autospeed -5 ~ 5 1/4 Auto pan speed
focusspeed -5 ~ 5 1/4 Auto focus speed
focusmode auto,onetimeauto,sp
otlight,manual
* Available values are
listed in
"capability_camctrl_c
<0~(n-1)>_focusmod
e" 1/4 Indicate the focus control mode.
© 2022 VIVOTEK INC. All Right Reserved
247
NAME VALUE SECURITY
(get/set) DESCRIPTION
preset_i<0~(k-1)>_name string[40] 1/4 Name of the preset location.
preset_i<0~(k-1)>_pan capability_ptz_c<0~(
n-1)>_minpan ~
capability_ptz_c<0~(
n-1)>_maxpan 1/4 Pan position at each preset
location.
preset_i<0~(k-1)>_tilt capability_ptz_c<0~(
n-1)>_mintilt ~
capability_ptz_c<0~(
n-1)>_maxtilt 1/4 Tilt position at each preset
location.
preset_i<0~(k-1)>_zoom capability_ptz_c<0~(
n-1)>_minzoom ~
capability_ptz_c<0~(
n-1)>_maxzoom
1/4 Zoom position at each preset
location.
preset_i<0~(k-1)>_focus capability_ptz_c<0~(
n-1)>_minfocus ~
capability_ptz_c<0~(
n-1)>_maxfocus
1/4 Focus position at each preset
location.
preset_i<0~(k-1)>_focus
setting sync,
fixcurrent 1/4 The focus mode of each preset,
which is essential and should be
grouped with
“preset_i<0~(k-1)>_name.”
* We support this parameter
when the version number
(httpversion) is equal or greater
than 0305b.
preset_i<0~(k-1)>_fliped <boolean> 1/4 Flip side at each preset location.
patrol_i<0~39>_name string[40] 1/4 (For internal device)
The name of patrol location
patrol_i<0~39>_
dwelling 0 ~ 999 1/4 (For internal device)
The dwelling time of each patrol
location
disablemdonptz <boolean> 1/4 Disable motion detection on PTZ
operation.
defaulthome <boolean> 1/4 This field tells system to use
default home position or not.
axisx capability_ptz_c<0~( 1/4 Custom home pan position.