39 camera ptz control, Vadp settings for each package, Vadp schedule settings – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual
Page 371: Vadp event settings
VIVOTEK
User's Manual - 371
© 2022 VIVOTEK INC. All Right Reserved
240
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
url
string[120]
1/7
The URL address of vadp hyperlink.
status
string[40]
1/7
Value of “on” indicates a valid
connection of vadp hyperlink.
Value of “off” indicates a invalid
connection of vadp hyperlink.
7.38.2.
VADP Settings for Each Package
Group:
vadp_module_i<0~(n-1)>
for n VADP package number
(capability_vadp_npackage > 0)
n denotes the value of "capability_vadp_npackage".
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
6/6
Indicate if the module is enabled or
not.
If yes, also add the index of this module
to the module_order.
name
string[40]
6/6
Module name
extendedname
string[40]
6/6
Extended module name. If this value is
not blank, it will be shown on the VADP
UI first instead of
vadp_module_i<n>_name.
url
string[120]
6/6
Define the URL string after the IP
address if the module provides it own
web page.
vendor
string[40]
6/6
The provider of the module.
vendorurl
string[120]
6/6
URL of the vendor.
version
string[40]
6/6
Version of the module.
license
string[40]
6/6
Indicate the license status of the
module.
licmsg
string[128]
6/6
Indicate the message that will be show
on license status when mouse over.
path
string[40]
6/7
Record the storage path of the module.
initscr
string[40]
6/7
The script that will handle operation
commands from the system.
status
string[40]
6/6
Indicate the running status of the
module.
© 2022 VIVOTEK INC. All Right Reserved
241
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
statmsg
string[128]
6/6
Indicate the message that will be show
on the running status when mouse
over.
vvtklicensemec
string[40]
6/7
Indicate the module use VIVOTEK
license mechanism
7.38.3.
VADP Schedule Settings
Group:
vadp_schedule_i<0~(n-1)>
for n VADP package number
n denotes the value of "capability_vadp_npackage".
(Only available when "capability_vadp_npackage" > 0 and the version number of "vadp_version" >=
"1.3.2.0")
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
6/6
Enable or disable the schedule mode to
control the execution of the VADP
package
begintime
hh:mm
6/6
Begin time of the schedule
endtime
hh:mm
6/6
End time of the schedule
7.38.4.
VADP Event Settings
Group:
vadp_event
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
ntrigger
0,<positive
integer>
6/7
Indicate the number of topics to be
transferred to event manager for
trigger.
triggerlist_i<0~(n-1)>_t
opic
string[256]
6/6
Indicate the event notification with this
topic will be transferred to event
manager as trigger.
n is equal to ntrigger above.
7.39
Camera PTZ Control
Group:
camctrl
(capability_camctrl_ptztunnel > 0)