Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 393)

VIVOTEK
User's Manual - 393
© 2022 VIVOTEK INC. All Right Reserved
262
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
focusshift_night_lastdate <blank>,
<YYYY/MM/DD
HH:MM:SS>
6/7 A recorded UTC time when IR offset value
is saved during night mode.
<blank> : IR offset value hasn't been
saved before.
© 2022 VIVOTEK INC. All Right Reserved
263
8. Useful Functions
8.1 Drive the Digital Output (capability_ndo > 0)
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/setdo.cgi?do0=<
value > [&do1=<value>]
[&do2=<value>][&do3=<value>]
Where state is 0 or 1; “0” means inactive or normal state, while “1” means active or triggered state,
and trigger time is indicated in seconds.
PARAMETER
VALUE DESCRIPTION
do<num> state[trigger time]
Where "state" is 0, 1.
“0” means inactive or
normal state while
“1” means active or
triggered state.
Where "trigger time"
is reset time after
state change.
Ex: do0=1
Setting digital output #1 to trigger state.
Ex: do0=0[30]
Setting digital output #1 to normal state, waiting 30
seconds, setting it to trigger state.
Example: Drive the digital output #1 to triggered state, reset do0 after 20 seconds and redirect to
an empty page.
http://myserver/cgi-bin/dido/setdo.cgi?do0=1[20]
8.2 Query Status of the Digital Input (capability_ndi > 0)
Note: This request requires Viewer privileges
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/dido/getdi.cgi?[di0][&di1][&di2][&di3]
If no parameter is specified, all of the digital input statuses will be returned.