Sdp for always multicast, 2 get, Capability_media_streamprofiles_support = 1) – Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens User Manual

Page 444

Advertising
background image

VIVOTEK

444 - User's Manual

© 2022 VIVOTEK INC. All Right Reserved

314

“n” is the maximum stream profile number (capability_media_streamprofiles_num)

“streamprofile_i<x>_token” is the unique identifier for each profile, x is within
0~(capability_media_streamprofiles_num)-1.

port is the rtsp port.

Please refer to the streamprofile group for requesting the stream profile token value for each
profile.

PARAMETER VALUE

DESCRIPTION

pimssm

1

1

: Enable the feature of Protocol

Independent Multicast - Source
Specific Multicast.
* This field is only required when
using PIM-SSM feature.
* Only valid when
network_rtsp_pimssm_enable=1.


Example:
Request the streaming of streamprofile_i0_token=Profile200,
rtsp://192.168.1.1:554/media2/stream.sdp?profile=Profile200

Note:

If the requested certain profile streamprofile_i<x>_occupied=0, which indicates stream profile <x>
has not been created, the above method for requesting RTSP streaming will fail.

8.39.2 Get

SDP for always multicast

(capability_media_streamprofiles_support = 1)

Note:

This request requires Viewer access privileges.

Method:

GET/POST


Syntax:
http://<

servername

>:<port>/media2/<streamprofile_i<0~(n-1)>_profilename>.sdp?[<parameter>=

<value>]

“n” is the maximum stream profile number (capability_media_streamprofiles_num)

“streamprofile_i<x>_profilename” is a friendly name for certain profile, x is within
0~(capability_media_streamprofiles_num)-1.

port is the http port.

Advertising