Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 391)

VIVOTEK
User's Manual - 391
© 2022 VIVOTEK INC. All Right Reserved
260
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
name string[40] 6/6 Identification of this entry.
ipaddress <ip address> 6/6 The ipaddress of the receiving camera.
username string[64] 6/6 The username of the receiving camera.
passwd string[64] 7/6 The password of the receiving camera.
port 0~65535 6/6 The connection port to the receiving
camera.
do <integer>[trigger
time] 6/6 Indicate the source id and trigger time of
di trigger.
Ex. “0[10]” sets do0 with trigger time of
10 s for the receiving camera.
autotrack_enable <Boolean> 6/6 Enables autotracking for the receiving
camera.
autotrack_index 0,<positive
integer> 6/6 PTZ preset index with smart tracking
advanced of the receiving camera.
* Only valid when the camera supports
“Smart Tracking Advanced” feature.
(Please refer to PTZ Control API for more
details)
* We support this parameter when the
version number (httpversion) is equal or
greater than 0317d.
gotopreset_enable <Boolean> 6/6 Enable the PTZ preset function of the
receiving camera.
gotopreset_type mechanical, digital 6/6 PTZ type of the receiving camera.
gotopreset_index 0, <positive
integer> 6/6 PTZ preset index of the receiving camera.
gotopreset_channel 0, <positive
integer> 6/6 PTZ preset channel of the receiving
camera.
gotopreset_stream 0, <positive
integer> 6/6 PTZ preset stream of the receiving
camera.
7.55 Extension Module IO
Group: Extension (capability_extension_di_num > 0 or capability_extension_do_num > 0)
© 2022 VIVOTEK INC. All Right Reserved
261
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
connected <Boolean> 6/7 Indication if extension module IO is
connected.
7.56 Focussystem
Group: focussystem_c<0~(n-1)> (capability_image_c<0~(n-1)>_remotefocus > 0)
n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
autofocus_enablebyzoom <Boolean> 7/6 To allow the feature of auto focus when
zoom is operated.
* Only available when
capability_image_c<0~(n-1)>_focussyste
m_mode=AFbyzoom
7.55.1. Save Day/Night Focus Position
Group: focussystem_c<0~(n-1)> (capability_image_c<0~(n-1)>_remotefocus > 0 and
capability_image_c<0~(n-1)>_focussystem_mode=focusshift)
n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set) DESCRIPTION
focusshift_enable <Boolean> 6/6 To allow the remotefocus system to apply
a shifted day or night position indicated
in day_position or night_position.
focusshift_day_position <blank>,
<positive integer>
6/7 A customized IR offset value in lens
profile when ICR is switched to day
mode.
<blank> : default IR offset value is used.
focusshift_day_lastdate <blank>,
<YYYY/MM/DD
HH:MM:SS>
6/7 A recorded UTC time when IR offset value
is saved during day mode.
<blank> : IR offset value hasn't been
saved before.
focusshift_night_position <blank>,
<positive integer>
6/7 A customized IR offset value in lens
profile when ICR is switched to night
mode.
<blank> : default IR offset value is used.