Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 406)

VIVOTEK
406 - User's Manual
© 2022 VIVOTEK INC. All Right Reserved
276
network_rtsp_s2_accessname = live2s1.sdp
network_rtsp_s3_accessname = live2s2.sdp
etc.
* For version number(httpversion) above 0311c, the default RTSP access name format is
“live<n>s<m>.sdp”. Please refer to the “subgroup of network: rtsp” for setting the accessname of
SDP.
* You can get the SDP by HTTP GET.
* When using scalable multicast, Get SDP file which contains the multicast information via HTTP.
Note:
* We recommend to use new format to access streaming when
capability_media_streamprofiles_support=1, please refer to
Methods for Accessing Streaming
8.14 Open the Network Stream
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<
servername >/<network_http_s<0~m-1>_accessname>
For RTSP (MP4), the user needs to input theURL below into an RTSP compatible player.
rtsp://<
servername >/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number.
For details on streaming protocol, please refer to the “control signaling” and “data format”
documents.
8.15 Send Data (capability_nuart > 0)
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/viewer/senddata.cgi?
[com=<value>][&data=<value>][&flush=<value>] [&wait=<value>] [&read=<value>]
PARAMETER
VALUE DESCRIPTION
com 1 ~ <max. com port
number> The target COM/RS485 port number.