Vivotek MD9584-HF3 5MP Outdoor Network Mobile Dome Camera with Night Vision, Heater & 3.6mm Lens - Manual (Page 217)

VIVOTEK
User's Manual - 217
© 2022 VIVOTEK INC. All Right Reserved
86
NAME VALUE SECURITY
(get/set) DESCRIPTION
"capability_image_c<0~(n-1)>_exposu
re_rangetype" is "onevalue".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
enableblc
<Not support
anymore>
<boolean> 4/4 Enable backlight compensation.
* Not support this parameter
anymore when the version number
(httpversion) is equal or greater than
0301a.
* It's recommanded to use
"exposurewin_c<n>_mode" to switch
on/off BLC.
exposurelevel 0~12 4/4 Exposure level
"0,12": This range takes the concept
from DC's exposure tuning options.
The definition is:
0: EV -2.0
1: EV -1.7
2: EV -1.3
3: EV -1.0
4: EV -0.7
5: EV -0.3
6: EV 0
7: EV +0.3
8: EV +0.7
9: EV +1.0
10: EV +1.3
11: EV +1.7
12: EV +2.0
*Only available when
"capability_image_c0_exposure_mod
e" != 0
exposuremode
<product
dependent>
auto,
shutterpriority,
irispriority, 4/4 Select exposure mode.
"auto" : Automatically adjust the Iris,
Gain and Shutter Speed to fit the
© 2022 VIVOTEK INC. All Right Reserved
87
NAME VALUE SECURITY
(get/set) DESCRIPTION
qualitypriority,
manual,
etc
(Available options are list
in
"capability_image_c<0~(n-
1)>_exposure_modetype") exposure level.
"shutterpriority" : Manually adjust
with variable Shutter Speed, and keep
adjusting Iris, Gain automatically.
"irispriority" : Manually adjust with
variable Iris, and keep adjusting Gain
and Shutter speed automatically.
"qualitypriority" : Automatically
adjust the Iris, Gain and Shutter Speed
by VIVOTEK quality algorithm.
"manual" : Manually adjust with
variable Shutter, Iris and Gain.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0302a.
*Only available when
"capability_image_c0_exposure_mod
e" != 0
whitebalance
<product
dependent>
auto,
panorama,
manual,
rbgain,
widerange,
outdoor,
indoor,
sodiumauto,
etc
(Available values are listed
in
"capability_image_c<0~(n-
1)>_wbmode") 4/4 Modes of white balance.
"auto" : Auto white balance
"panorama" : indicates that camera
would try to balance the white
balance effect of every sensor.
"rbgain" : Use rgain and bgain to set
white balance manually.
"manual" : 2 cases:
a. if "rbgain" is not supported, this
means keep current white balance
status.
b. if "rbgain" is supported, "rgain"
and "bgain" are updated to the
current values which is got from
white balance module. Then, act as
rbgain mode
"widerange" : Auto Tracing White
balance (2000K to 10000K).