Brocade TurboIron 24X Series Configuration Guide - Manual (Page 1088)

1054 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Syslog messages
Information MAC Filter removed from port <port-id> by
<username> from <session-id> (filter
id=<filter-ids> ) Indicates a MAC filter was removed from the
specified port by the specified user during
the specified session.
<session-id> can be console, telnet, ssh,
web, or snmp.
<filter-ids> is a list of the MAC filters that
were removed.
Information Security: Password has been changed for
user <username> from <session-id> Password of the specified user has been
changed during the specified session ID or
type. <session-id> can be console, telnet,
ssh, web, or snmp.
Informational <device-name> : Logical link on interface
ethernet <port#> is down. The specified ports were logically brought
down while singleton was configured on the
port.
Informational <device-name>: Logical link on interface
ethernet <port#> is up. The specified ports were logically brought
up while singleton was configured on the
port.
Informational <user-name> login to PRIVILEGED mode A user has logged into the Privileged EXEC
mode of the CLI.
The <user-name> is the user name.
Informational <user-name> login to USER EXEC mode A user has logged into the USER EXEC mode
of the CLI.
The <user-name> is the user name.
Informational <user-name> logout from PRIVILEGED mode A user has logged out of Privileged EXEC
mode of the CLI.
The <user-name> is the user name.
Informational <user-name> logout from USER EXEC mode A user has logged out of the USER EXEC
mode of the CLI.
The <user-name> is the user name.
Informational ACL <ACL id> added | deleted | modified
from console | telnet | ssh | web | snmp
session A user created, modified, deleted, or
applied an ACL through a Web, SNMP,
console, SSH, or Telnet session.
Informational Bridge is new root, vlan <vlan-id>,
root ID <root-id> A Spanning Tree Protocol (STP) topology
change has occurred, resulting in the
device becoming the root bridge.
The <vlan-id> is the ID of the VLAN in which
the STP topology change occurred.
The <root-id> is the STP bridge root ID.
Informational Bridge root changed, vlan <vlan-id>, new
root ID <string>, root interface <portnum> A Spanning Tree Protocol (STP) topology
change has occurred.
The <vlan-id> is the ID of the VLAN in which
the STP topology change occurred.
The <root-id> is the STP bridge root ID.
The <portnum> is the number of the port
connected to the new root bridge.
TABLE 176 Brocade Syslog messages (Continued)
Message level Message Explanation