Brocade TurboIron 24X Series Configuration Guide - Manual (Page 1100)

1066 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Syslog messages
Notification OSPF intf retransmit, rid <router-id>,
intf addr <ip-addr>, nbr rid <nbr-router-id>,
pkt type is <pkt-type>, LSA type <lsa-type>,
LSA id <lsa-id>, LSA rid <lsa-router-id> An OSPF interface on the device has
retransmitted a Link State Advertisement
(LSA).
The <router-id> is the router ID of the
device.
The <ip-addr> is the IP address of the
interface on the device.
The <nbr-router-id> is the router ID of the
neighbor router.
The <packet-type> can be one of the
following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
Notification OSPF LSDB approaching overflow,
rid <router-id>, limit <num> The software is close to an LSDB condition.
The <router-id> is the router ID of the
device.
The <num> is the number of LSAs.
Notification OSPF LSDB overflow, rid <router-id>,
limit <num> A Link State Database Overflow (LSDB)
condition has occurred.
The <router-id> is the router ID of the
device.
The <num> is the number of LSAs.
Notification OSPF max age LSA, rid <router-id>,
area <area-id>, LSA type <lsa-type>,
LSA id <lsa-id>, LSA rid <lsa-router-id> An LSA has reached its maximum age.
The <router-id> is the router ID of the
device.
The <area-id> is the OSPF area.
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
TABLE 176 Brocade Syslog messages (Continued)
Message level Message Explanation