Brocade TurboIron 24X Series Configuration Guide User Manual
Page 624
590
Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
802.1s Multiple Spanning Tree Protocol
To display details about the MSTP that is configured on the device, enter the following command.
for explanation about the parameters in the output.
Syntax: show mstp [<mstp-id> | configuration | detail] [ | begin <string> | exclude <string> |
include <string>]
Enter an MSTP ID for <mstp-id>.
TurboIron#show mstp conf
MSTP CONFIGURATION
------------------
Name : Reg1
Revision : 1
Version : 3 (MSTP mode)
Status : Started
Instance VLANs
-------- ------------------------------------------------------
0 4093
TurboIron#show mstp detail
MSTP Instance 0 (CIST) - VLANs: 4093
----------------------------------------------------------------------------
Bridge: 8000000000c00000 [Priority 32768, SysId 0, Mac 000000c00000]
FwdDelay 15, HelloTime 2, MaxHops 20, TxHoldCount 6
Port 54 - Role: DESIGNATED - State: FORWARDING
PathCost 20000, Priority 128, OperEdge T, OperPt2PtMac F, Boundary T
Designated - Root 8000000000c00000, RegionalRoot 8000000000c00000,
Bridge 8000000000c00000, ExtCost 0, IntCost 0
ActiveTimers - helloWhen 1
MachineState - PRX-DISCARD, PTX-IDLE, PPM-SENDING_RSTP, PIM-CURRENT
PRT-ACTIVE_PORT, PST-FORWARDING, TCM-INACTIVE
BPDUs - Rcvd MST 0, RST 0, Config 0, TCN 0
Sent MST 6, RST 0, Config 0, TCN 0