Brocade TurboIron 24X Series Configuration Guide - Manual (Page 1104)

1070 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Syslog messages
Notification OSPF virtual intf retransmit, rid <router-id>,
intf addr <ip-addr>, nbr rid <nbr-router-id>,
pkt type is <pkt-type>, LSA type <lsa-type>,
LSA id <lsa-id>, LSA rid <lsa-router-id> An OSPF interface on the device has
retransmitted a Link State Advertisement
(LSA).
The <router-id> is the router ID of the
device.
The <ip-addr> is the IP address of the
interface on the device.
The <nbr-router-id> is the router ID of the
neighbor router.
The <packet-type> can be one of the
following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
Notification OSPF virtual intf state changed,
rid <router-id>, area <area-id>,
nbr <ip-addr>, state <ospf-state> Indicates that the state of an OSPF virtual
routing interface has changed.
The <router-id> is the router ID of the router
the interface is on.
The <area-id> is the area the interface is in.
The <ip-addr> is the IP address of the OSPF
neighbor.
The <ospf-state> indicates the state to
which the interface has changed and can
be one of the following:
•
down
•
loopback
•
waiting
•
point-to-point
•
designated router
•
backup designated router
•
other designated router
•
unknown
TABLE 176 Brocade Syslog messages (Continued)
Message level Message Explanation