Displaying msdp information, Displaying summary information – Brocade TurboIron 24X Series Configuration Guide User Manual
Page 878

844
Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Multicast Source Discovery Protocol (MSDP)
TurboIron(config)#router pim
TurboIron(config-router-pim)#bsr-candidate loopback 1 14 34
TurboIron(config-router-pim)#rp-candidate loopback 1
TurboIron(config-router-pim)#exit
TurboIron(config)#router bgp
TurboIron(config-router-bsr)#local-as 444
TurboIron(config-router-bsr)#neighbor 10.34.34.3 remote-as 333
TurboIron(config-router-bsr)#neighbor 10.34.34.3 next-hop-self
TurboIron(config-router-bsr)#neighbor 10.14.14.1 remote-as 111
TurboIron(config-router-bsr)#neighbor 10.14.14.1 next-hop-self
TurboIron(config-router-bsr)#neighbor 10.24.24.2 remote-as 222
TurboIron(config-router-bsr)#neighbor 10.24.24.2 next-hop-self
TurboIron(config-router-bsr)#neighbor 10.48.48.8 remote-as 888
TurboIron(config-router-bsr)#neighbor 10.48.48.8 next-hop-self
TurboIron(config-router-bsr)#neighbor 10.134.134.13 remote-as 1313
TurboIron(config-router-bsr)#neighbor 10.134.134.13 next-hop-self
TurboIron(config-router-bsr)#redistribute connected
TurboIron(config-router-bsr)#write memory
Displaying MSDP information
You can display the following MSDP information:
•
Summary information – the IP addresses of the peers, the state of the Layer 3 Switch MSDP
session with each peer, and statistics for Keepalive, Source Active, and Notification messages
sent to and received from each of the peers
•
Peer information – the IP address of the peer, along with detailed MSDP and TCP statistics
•
Source Active cache entries – the Source Active messages cached by the Layer 3 Switch
Displaying summary information
To display summary MSDP information, enter the following command at any level of the CLI:
Syntax: show ip msdp summary
This display shows the following information.
TurboIron(config-msdp-router)#show ip msdp summary
MSDP Peer Status Summary
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address State KA SA NOT
In Out In Out In Out
10.251.17.30 ESTABLISH 3 3 0 640 0 0
10.251.17.41 ESTABLISH 0 3 651 0 0 0