Konica Minolta bizhub C650 - Manual (Page 2)

Introduction
CMS:
• The CMS (Customer Maintenance Support) is a system that supports the customer who
conducts a parts replacement operation by himself without getting an technical assis-
tance from the customer engineer, to minimize the downtime (shutdown period of the
machine operation) of the machine of the customer.
Notices to the customer who employs the CMS:
• When you want to employ the CMS, be sure to follow the instructions given by the cus-
tomer engineer.
And also, when you conduct a part replacement operation, be sure to read each replace-
ment instruction and follow the specific instructions given in it. For your safety while in the
replacement operation, be sure to keep this CMS Instructions for Replacement safely,
and also be careful not to get it lost. Should it get lost, contact our service representative.
Registered trademark
• bizhub PRO is a registered trademark of KONICA MINOLTA BUSINESS TECHNOLO-
GIES, INC.
Copyright
© 2007 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.