Konica Minolta bizhub C650 - Manual (Page 28)

Transfer belt unit, Transfer roller unit replacement instructions
4
10. Remove the rail [1] that aids in
mounting the transfer belt unit from
the tray 1.
11. Install the rail [1] on the main body
and secure it with two shoulder
screws [2].
NOTE
• Make sure that the protrusion (at
two places) on the rail is inserted
into the dowel holes [3] (at two
places) on the main body.
12. Grip the parts [1] of the transfer belt
unit and slide it out until it touches
the stopper [2] of the rail.
[1]
A00JF2C050DA
[2]
[2] [1]
[3]
A00JF2C051DA
[1] [2]
[1]
A00JF2C052DA