Konica Minolta bizhub C650 - Manual (Page 6)

For your safe operation
S-3
• Make sure the wiring cannot come into contact with sharp
edges, burrs, or other pointed parts.
Current can leak, leading to a risk of electric shock or fire.
• Make sure that all screws, components, wiring, connec-
tors, etc. that were removed for safety check and mainte-
nance have been reinstalled in the original location. (Pay
special attention to forgotten connectors, pinched cables,
forgotten screws, etc.)
A risk of product trouble, electric shock, and fire exists.
CMS part replacement operation:
WARNING
Power plug, power code:
WARNING
• Make sure the power cord is plugged in the wall outlet
securely.
Contact problems may lead to increased resistance, over-
heating, and the risk of fire.
• When using the power cord set (inlet type) that came with
this product, make sure the connector is securely inserted
in the inlet of the product. When securing measure is pro-
vided, secure the cord with the fixture properly.
If the power cord (inlet type) is not connected to the prod-
uct securely, a contact problem may lead to increased
resistance, overheating, and risk of fire.
• Do not insert the power plug into the wall outlet with a wet
hand.
The risk of electric shock exists.
• When unplugging the power cord, grasp the plug, not the
cable.
The cable may be broken, leading to a risk of fire and elec-
tric shock.