Konica Minolta bizhub C650 - Manual (Page 34)

Transfer belt unit, Transfer roller unit replacement instructions
10
2. Transfer roller unit
2.1 Removal procedure
1. Raise the lock levers [1] (at two
places) of the transfer roller unit in
the direction shown by the arrows to
unlock the transfer roller unit.
2. Holding onto the lock levers [1] (at
two places), remove the transfer
roller unit [2].
2.2 Reinstallation procedure
1. Holding onto the lock levers [1] (at
two places), mount the new transfer
roller unit [2].
2. Lower the lock levers [1] (at two
places) toward the direction shown
by the arrows to lock the transfer
roller unit.
NOTE
• Make sure that the levers are locked
in position both at front and rear.
3. Close the upper right door [1].
[1]
[2]
A00JF2C055DA
[2]
[1]
A00JF2C056DA
A00JF2C544DA
[1]